JAVID PULIKUTH
Maintenance Engineer (B.Tech)
Cell: -
E-mail:-
Summary
Mechanical engineering graduate with hands on experience in construction project, factory maintenance,
outboard marine engine service and maintenance of MEP and fire-fighting systems of a 4-star rated hotel
under the management of IHG.
Experience
Company: Zahrani Operations and Maintenance-KSA
Project: Al-Keswah Towers Hotel-Makkah
Designation: Maintenance Engineer.
Duration: March 18th 2017- March 15th 2019
Al-Keswah Towers Hotel: 4-star rated hotel with 5568 rooms that can accommodate
22,000 guests at a time. Zahrani Operations and Maintenance was responsible for
the operations and maintenance of the facility under the direct management of IHG.
Scope of work:
Preventive and Corrective Maintenance of Air-Cooled Chillers (York YCIV-397SA40). AHUs,
CM, FCU, Thermostat, Heat Exchangers, Exhaust Fans, etc.
Preventive and Corrective Maintenance of Centrifugal Pumps. Fire-fighting systems (FM-200,
foam, ceiling mounted fire extinguishers, portable fire extinguishers, fire hose cabinets, fire
engines, electric pumps, jockey pumps, pressurization fans, smoke fans, emergency exit
paths, exit sign boards, fire doors, etc.).
Installation of Fire-Rated Doors.
Skills:
Ability to read and interpret drawings associated with HVAC systems.
Ability to prepare various reports regarding maintenance activities and projects.
Familiar with Sky-Horizon Quality Management Software.
Ability to prepare Work Order and Request For Inspection as per the requirements.
Company: SAUDI ARABIAN PLASTIC FACTORY-KSA
Designation: Maintenance Engineer.
Duration: February 5th 2017- March 10th 2017
Situated in Taneem Industrial Area, Saudi Arabian Plastic Factory has a flexible
manufacturing infrastructure to produce plastic bags of various specifications as per
the requirements of the clients.
Scope of work:
Preventive and corrective maintenance of rollers, gear boxes, various mechanisms
associated with various units and machinery.
Trouble shooting of hydraulic and pneumatic systems.
Basic fabrication methods like welding, grinding, drilling, tapping, etc.
Skills:
Ability to read and interpret hydraulic and pneumatic schematics.
Ability to assemble and overhaul various machinery as per the drawing.
Ability to read and interpret various drawings associated with machinery.
Basic welding and grinding techniques and ability to use various power and manual tools.
Company: DELMA INDUSTRIAL SUPPLY & MARINE SERVICES-UAE
Designation: Mechanical Engineer (Service).
Duration: June 7th 2015- February 25th 2016.
Situated in Abu Dhabi, Delma Industrial Supply & Marine Services is the authorized dealer of
Mercury Marine engines in UAE and is responsible for the service and maintenance of UAE coastguard boats.
Scope of work:
Installation, Trouble shooting and Service of Mercury 2 stroke and 4 stroke outboard marine
engines.
Normal and Full service-Inspection of Battery, Fuel line, Spark Plug, Accessory drive belt etc.Familiar with Cavitation, Ventilation, Detonation etc.-Compression check-Cylinder leakage
testing-Selection of connecting rod bearings, main bearings and thrust bearings from the
codes-Trouble shooting ignition system using CDS and spark gap tester-Checking spark plugs,
injectors, ignition coils, relays using CDS-Timing adjustments-Retrieving and clearing fault
history and codes using CDS-Priming the oil pump using the CDS-Power trim system trouble
shooting-Familiar with various sensors like CPS, Camshaft Position Sensor, Cylinder Block
Temperature Sensor, MAP Sensor, Pitot Pressure Sensor, Knock Sensor, Oil Temperature and
Pressure Sensor etc.-Overhauling of various outboard engines and reassembly.
Skills:
Familiar with various engine subsystems like Fuel System, Ignition System, Electrical and
Mechanical systems of SI Engines.
Ability to prepare spare parts list from Electronic Parts Catalogue using engine model and
serial number.
Ability to read and interpret hydraulic and pneumatic schematics.
Familiar with PLM software like CATIA V5 and analysis software like ANSYS.
Company: THE COMMON WEALTH TRUST (INDIA) LTD.
Designation: Maintenance Engineer.
Duration: October 6th 2013- March 31st 2015.
Located in Calicut, CTIL, produces various clay based products (roof tiles, floor tiles,
ridge tiles, hollow blocks, wire cut bricks, etc.) of very high quality, since its
establishment in 1905 (Feroke Tile Factory)
Scope of work:
Preventive maintenance of double acting piston pump, worm reduction gear, double shaft
mixer, de-airing unit, centrifugal pumps, revolving press, conveyor belt, extruder, pan mill,
engine-generator set and Hoffman’s kiln.
Overhauling of double acting piston pump, double shaft mixer and worm reduction gear.
Skills:
Read and interpret pneumatic and hydraulic schematic.
Read and interpret isometric drawings, assembly drawings, (Machine drawings) and various
orthographic projection drawings.
Retrofitting and designing of new process lines.
Calibration of various instruments and testing of raw materials.
Company: PKM Constructions Pvt. Ltd.
Project: 3*660 MW TPS Koradi Expansion Project.
Designation: Site Engineer.
Duration: September 5th 2011-September 30th 2013
PCPL won the subcontract to construct the electrostatic precipitator for unit #08 of
the power plant from Larson and Toubro Power Ltd. (9,000 ton structural steel work)
Scope of work:
Coordination with Engineering team, review and approval of drawings, and construction
procedures- Review and approval of the as-built drawings- Review of material requisition,
Mechanical engineering deliverables, drawings and vendor documentation for compliance to
quality requirements- Installation of various instruments as per the drawings- Fabrication
and erection of various systems and components- Supervision of welding. Documentation of
safety procedures and monitoring the same in every activity.
Skills:
Interpreting piping isometrics- Interpreting P&IDs (I&C symbols as per ISA-5.1)- Interpreting
welding symbols as per AWS standard- Familiar with Pipe Arrangement Drawing, Sections
and Elevations- Familiar with various piping components and their symbols- Familiar with
site plan, unit plot plan, equipment location drawing, foundation location drawing and
piping drawing index- Piping material specification as per ASME/ASTM standard- Familiar
with various codes related to pressure piping, standards of pipes and fittings- Familiar with
testing of piping systems- Hydrotest- NDT Level II certification as per SNT-TC-1A-2006
edition (RT, UT, MT and PT)(Date of expiry: 11/06/2016)
Computer Skills
Drafting: AutoCAD 2010
PLM Software: CATIA V5
Analysis Software: ANSYS.
Office Tools: MS Word 2010, MS PowerPoint 2010, MS Excel 2010
CNC Programming for Machining Centre and & CNC Lathe.
Current Address
Peerakuzhiyil House; Veemboor; Mariyad P.O; Manjeri Via; Malappuram Dist; Keralal676122; India.
Academic History
Graduated from N. S. S College of Engineering, under university of Calicut with 64.77%.(1st
class)(B.Tech Degree in Mechanical Engineering).
HSE from P. P. M. H. S. S Kottukkara with 76.66%.(Distinction).
S. S. L. C from P. P. M. H. S. S Kottukkara with 92.33%.(Distinction).
Diploma in CAD, CAM & CAE from PSG Tech-Coimbatore with >80% (Distinction).
Languages known
Language
English
Arabic
Malayalam
Hindi
Russian
Listening
Speaking
Reading
Writing
Typing
Personal Details
Date of Birth: 7th April 1987.
Nationality: Indian.
Driving License: Indian, Kingdom of Saudi Arabia (Date of Expiry: 18/02/2026)
Passport No: U-. (Date of Expiry: 17 /03/2030)
Permanent address: Peerakuzhiyil House; Veemboor; Mariyad P.O;
Manjeri Via; Malappuram Dist; Kerala-67 61 22; India
Linkedin Profile: https://www.linkedin.com/in/javid-pulikuth-
Reference
Available on Request.
Declaration
I do hereby certify that all information furnished herein are true to best of my knowledge and belief.
Javid. P